Rust remediation proven millions of times

Brunox provides rust remediation in only three steps. 1. Sand off loose rust. Remove rust particles with a damp cloth/compressor. 2. Apply Brunox epoxy twice with a brush or fill into an airless device/paint spray gun and apply as with Brunox epoxy spray and later test to see if it is completely dry (fingernail hard after around 24 hours at 20 °C, no washing required). 3. Dry sand Brunox epoxy layer, only remove shine. Apply putties, Bronox 1-K-Filler or directly apply the final varnish.
www.brunox.de